My Blog

Posts for category: Dental Procedures

By Garrett T. Hayashi, DDS
November 20, 2019
Category: Dental Procedures
ViggoMortensensRed-CarpetSmile

The Golden Globes ceremony is a night when Hollywood stars shine their brightest. At the recent red-carpet event, leading man Viggo Mortensen had plenty to smile about: Green Book, the movie in which he co-starred, picked up the award for Best Motion Picture—Musical or Comedy. But fans looking at the veteran actor's big smile today might not realize that it once looked very different. A few years ago, an accident during the filming of The Two Towers took a major chip out of Mortensen's front tooth!

That might be OK for some movies (think The Hangover or Dumb and Dumber)—but it's not so great for everyday life. Fortunately, Mortensen visited a dentist promptly, and now his smile is picture-perfect. How was that accomplished? He didn't say…but generally, the best treatment for a chipped tooth depends on how much of the tooth's structure is missing.

If the tooth has only a small chip or crack, it's often possible to restore it via cosmetic bonding. This procedure can be done right in the dental office, frequently in a single visit. Here's how it works: First the tooth is cleaned and prepared, and then a tooth-colored resin is applied to the area being restored. After it is cured (hardened) with a special light, additional layers may be applied to build up the missing structure. When properly cared for, a tooth restored this way can look good for several years.

For a longer-lasting restoration, veneers may be recommended. These are wafer-thin shells made of durable material (most often porcelain) that cover the front (visible) surfaces of teeth. Strong and lifelike, veneers can match the exact color of your natural teeth—or give you the bright, high-wattage smile you've always wanted. No wonder they're so popular in Hollywood! Because veneers are custom-made for you, getting them may require several office visits.

If a chip or crack extends to the inner pulp of the tooth, a root canal procedure will be needed to keep the tooth from becoming infected—a situation that could have serious consequences. But you shouldn't fear a root canal! The procedure generally causes no more discomfort than filling a cavity (though it takes a little longer), and it can help save teeth that would otherwise be lost. After a root canal, a crown (cap) is generally needed to restore the visible part of the tooth.

When a damaged tooth can't be restored, it needs to be extracted (removed) and replaced. Today's best option for tooth replacement is a dental implant—a small, screw-shaped post inserted into the bone of your jaw that anchors a lifelike, fully functional crown. Implants require very little special care and can look great for many years, making them a top choice for tooth replacement

If you have questions about chipped or damaged teeth, please contact our office or schedule a consultation. You can read more in the Dear Doctor magazine articles “Artistic Repair Of Front Teeth With Composite Resin” and “Porcelain Veneers.”

By Garrett T. Hayashi, DDS
November 18, 2019
Category: Dental Procedures
Tags: CEREC Crowns  

How CEREC crowns from your dentist in Honolulu, HI, can help your smile

Do you need a new dental crown? If so, are you concerned about it taking weeks to get your new crown? There is a revolutionary new crown-and-bridgecrown technology you need to know about. It’s called CEREC same-day crown technology and it allows you to have your crown made in-office in just one appointment! Dr. Garrett T. Hayashi in Honolulu, HI, offers CEREC crowns to help your smile—read on to learn more!

 

More about Crowns

In the past, getting a dental crown required at least two appointments. The first was a tooth preparation appointment, followed by waiting weeks for your new crown to be delivered from a dental laboratory. Then at the second appointment, your dentist would finally place your crown. During those weeks of waiting, you would have to wear a less comfortable temporary crown.

However, those days are gone, thanks to CEREC same-day crowns! CEREC uses a technology known as CAD/CAM which stands for computer-assisted design/computer-assisted manufacturing. CAD/CAM uses a system of 3D imaging combined with precise computer measurement to design your beautiful new dental crown in a quick and reliable fashion!

Because of its unique, ground-breaking technology, CEREC crowns offer several advantages, including:

  • A beautifully natural-looking crown, because CEREC crowns are made of high-grade dental ceramic that closely resembles natural tooth structure.
  • A perfectly fitting crown, because CEREC crowns are created from a precisely measured template that is unique to your tooth.
  • No need for a temporary crown, because your new CEREC crown is made in the office, while you wait.

 

Need Dental Work Done? Give Us a Call

You and your smile deserve to enjoy the many advantages of CEREC same-day crowns. To learn more about this amazing crown manufacture technology and how it can help your smile, call your dentist, Dr. Garrett T. Hayashi in Honolulu, HI, today at (808) 536-5090.

ConsideranEffectiveandAffordableRPDforTeethReplacement

If you have a few missing teeth but can't afford dental implants or fixed bridgework, consider a removal partial denture (RPD). Although implants may be the superior choice aesthetically and functionally, an RPD can still effectively give you back your teeth.

RPDs are designed to replace one or more missing teeth but not a full arch like a full denture. Considered a permanent restoration, RPDs are also more durable than transitional "flippers," denture appliances that are flexible and light enough to be flipped out of the mouth with a flick of the tongue.

The key to both their affordability and durability is vitallium, a strong but lightweight metal alloy most often used in their frame construction. To it we attach artificial teeth usually made of porcelain or glass-filled resins that occupy the precise location of the missing teeth on the gum ridge. The artificial teeth and frame are surrounded by gum-colored plastic for a more natural look.

Each RPD is custom-made depending on the number and location of the missing teeth. Its construction will focus on minimizing any rocking movement of the RPD during chewing or biting. Too much of this movement could damage the adjacent teeth it's attaching to and cause the appliance to be uncomfortable to wear. We can stabilize the frame by precisely fitting it between teeth to buttress it. We also insert small rests or clasps made of vitallium at strategic points to grip teeth and minimize movement.

RPDs do have some downsides: their unique attachment with teeth encourages the accumulation of dental plaque, the thin bacterial film that's the leading cause of tooth decay and periodontal (gum) disease. These diseases can affect your remaining teeth's health and stability, which could in turn disrupt the fit of the RPD. Also, too much movement of the appliance can make the teeth to which it's attached become more mobile. It's important, then, if you wear a RPD to remove it daily for cleaning (and to thoroughly brush and floss your natural teeth), and to remove it at night to give the attaching teeth a rest.

A RPD can give you back the teeth you've lost for many years to come—if you take care of it. Maintaining both your RPD and the rest of your teeth and gums will help extend the life and use of this effective and affordable replacement restoration.

If you would like more information on teeth replacement options, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Removable Partial Dentures: Still a Viable Tooth-Replacement Alternative.”

By Garrett T. Hayashi, DDS
October 01, 2019
Category: Dental Procedures
Tags: crown  
CustomizedTemporaryCrownsletyouRehearseYourFutureSmile

Modern restorations for severely damaged or missing teeth are truly remarkable. Although the type of restoration may differ — dental implant, bridge, or veneer — the end result is a life-like facsimile that matches the shape and color of your natural teeth.

To achieve this result, though, the new crown or veneer requires fabrication in a dental laboratory, a meticulous process that may take a few weeks. In the interim, we often install temporary crowns. These help in a number of ways: because we’ve prepared the teeth for final restoration by removing some of the tooth structure, the temporary crown protects and stabilizes the teeth, reduces sensitivity and helps maintain gum health. Temporary crowns also enable the patient to present a more natural smile while waiting for the permanent restoration.

Temporary crowns are typically manufactured to fit a wide range of patients, similar to an “off-the-rack” suit from a clothing store. In recent years, though, customized “tailored” temporary crowns designed specifically for an individual patient have grown in popularity among dental professionals as well as patients.

In creating a customized temporary crown, we first perform a smile analysis similar to one used for a permanent restoration. After a careful assessment of your mouth, we would then make recommendations about the elements to include in the temporary crown, including shape and color. We would also factor in your desires and concerns into the final design. Working together with the dental laboratory, we would then have the temporary crowns produced and ready to apply as soon as we complete the preparatory work.

Customized temporary crowns also serve another important purpose as a kind of “dress rehearsal” for the permanent restoration. This gives you an opportunity to “try out” the smile you’ll have with the permanent restoration in your daily life. We can then use your experience to make adjustments to the permanent crowns before final production.

While customized temporary crowns involve more effort and expense than the traditional, the benefits are worth the added cost, especially if you’re involved with an extensive “smile makeover” procedure. Not only will you look better while your permanent restoration is under construction, your temporary look will give you added confidence that your future smile is right for you.

If you would like more information on temporary and permanent dental restorations, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Concepts of Temporary Restorations.”

By Garrett T. Hayashi, DDS
August 02, 2019
Category: Dental Procedures
Tags: crown  
AStainlessSteelCrownCouldExtendtheLifeofaPrimaryMolar

One of the key elements in a child’s development is their first set of teeth. Although primary (“baby”) teeth last only a few years, they’re critically important for enabling a child to eat solid foods, speak and smile.

But they also provide one more important benefit—they hold the space in the jaw reserved for the permanent teeth developing just under the gums until they erupt. But if a child loses a primary tooth prematurely because of disease or injury, other teeth may drift into the vacant space and crowd it out for the intended permanent tooth. It may then come in misaligned or remain stuck within the gums (impaction).

To avoid this, we try to treat and preserve a diseased primary tooth if at all practical. For a primary molar, one of the large teeth in the back of the mouth, this might include capping it with a stainless steel crown.

Why a metal crown? Primary molars normally don’t fall out until around ages 10-12, so it may be years for a younger child before their permanent molars erupt. All during that time these particular teeth will encounter heavier biting forces than teeth in the front.

A steel crown is often the best solution for a molar given their longer lifespans and encountered biting forces. The crown’s metal construction can stand up to these forces while still protecting the tooth from re-infection from decay. And because molars are typically outside of the “smile zone” occupied by more visible front teeth, the crown’s metal appearance isn’t usually an aesthetic issue.

Crowning a molar usually takes one visit, a dentist typically performing the procedure with local anesthesia and possibly a mild sedative like nitrous oxide gas (“laughing gas”). After removing any decayed structure from the tooth, the dentist will then fit a pre-formed crown over the remaining structure, sized and shaped to match the original tooth as close as possible.

A stainless steel crown is a cost-effective way to added needed years to a primary molar that could otherwise be lost prematurely. Preserving it may help a child avoid bite problems and expensive future treatments.

If you would like more information on dental care for primary teeth, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Stainless Steel Crowns for Kids: A Safe and Effective Way to Restore Primary Molars.”